Wet insulation rarely gives an early warning. A small breach at a seam, curb, or flashing lets water into the roof assembly while the membrane still looks fine. By the time ceiling tiles stain, the wet area has often spread. That moisture lowers R-value, adds dead load, and shortens roof life.
We wrote this guide to help facility managers, roofing crews, and Cx teams find moisture while repairs are still small. You’ll learn how an ASTM C1153 roof moisture survey works, which conditions give clean data, and what a useful report includes. We’ll also cover what to look for in a thermography partner. Keep reading to plan your next scan with confidence.
ASTM C1153 is the standard practice for locating wet insulation in roofing systems with infrared imaging. A thermographic roof inspection under this practice relies on thermal capacitance. During a sunny day, the roof absorbs solar load. After sunset, dry insulation releases that heat quickly. Wet insulation holds heat longer, so it shows up as a warm anomaly on the imager. These four tips help you get reliable results.
Infrared works best on low-slope roofs with absorbent insulation like perlite, wood fiber, or fiberglass. Closed-cell foams, heavy ballast, and pavers can mute the thermal signature. Review the roof’s construction with your thermographer before you book an infrared roof moisture scan. That way, you’ll know early if the assembly needs another detection method.
Timing drives data quality. You want a clear, sunny day before the scan and a dry roof surface with no standing water, frost, or snow. Calm wind matters too, since gusts strip heat from the surface. Scanning starts after sunset and runs while thermal contrast holds. Low-emissivity metallic coatings can hide anomalies, so flag them early.
A thermal image shows a suspect area. It doesn’t prove water. C1153 calls for confirmation with core samples or moisture meters. Cores also show the insulation type and how deep the water traveled. This step separates true wet insulation detection for commercial roof findings from false positives like extra adhesive, patched areas, or heat from rooftop equipment.
A strong report pairs each thermogram with a visible image. It outlines wet areas on a scaled roof plan, lists square footage, and includes core results. Crews should also mark membrane anomalies with paint. Your roofer can then cut out only the wet sections. A repeat flat roof moisture survey after major storms builds a useful baseline.
Thermography looks simple on a screen. Reading it correctly takes training. A qualified thermographer sets emissivity and reflected temperature correctly and knows how surface materials change the image. They can also tell a moisture pattern from a heat pattern caused by a roof drain or a patch.
Look for Level I or Level II thermography training and a calibrated imager with the right resolution. Ask how the team verifies findings and whether they plan cores before arriving. Night roof work also calls for real safety plans, including fall protection near edges and skylights.
For new construction, commercial roof thermal imaging before turnover catches water trapped during installation. Southeast summer storms often soak insulation boards that were laid down before the membrane went on. Finding that moisture early protects the warranty, keeps the owner’s records clean, and gives your Cx team documented proof of a dry roof at closeout.
Air Tight Solutions is a leading provider of energy efficiency testing and compliance services for new construction. Our certified team uses calibrated equipment and clear field methods to verify building performance for builders, Cx agents, and project teams across South Carolina, North Carolina, and Georgia.
Adding an ASTM C1153 roof moisture survey to your closeout plan helps you hand over a roof that performs from day one. We schedule around your timeline, explain findings in plain terms, and deliver reports your roofer can act on right away.
It’s the standard practice for locating wet insulation in roofing systems with infrared imaging. It guides scan conditions, equipment use, verification, and reporting.
Scan after sunset following a clear, sunny day. The roof surface should be dry, with calm wind and no standing water, frost, or snow.
No. Heavy ballast, pavers, closed-cell foam, and low-emissivity coatings can mask moisture. Your thermographer may suggest core sampling or moisture meters instead.
Infrared shows thermal anomalies, not confirmed water. Cores verify moisture, show insulation type, and help rule out false positives before repairs begin.
Scan new roofs before turnover. After that, many owners survey every few years and after major storms to catch leaks early.